Skip to content
Phone: 1-888-512-1209 | M-F 8-5pm CST
Phone: 1-888-512-1209 | M-F 8-5pm CST

Tablet Triturate Molds, 50 Cavity

$164.00
SKU E0626-00

Tablet Triturate Molds

Two-piece 50 cavity molds are designed for making tablet triturates or troches.  Each mold consists of a base plate with alignment pegs and a top plate with corresponding holes. To make tablets, place the top plate on a Glass Pill Tile or Ointment Slab then fill the holes evenly with the tablet paste using a hard rubber spatula to compress the mixture. When the paste has hardened, slide mold off edge of slab, align the top plate over the base plate and press down to punch out tablets from top plate.

Made of durable, corrosion-resistant anodized aluminum. Dishwasher safe. Marked with serial number for US DEA compliance. Available in three sizes: 60, 100 and 200 mg. All are 6 x 3 in. / 15.2 x 7.6 cm.

Mold Size 60 mg 100 mg 200 mg
Hole Size Ø x D:    0.18 x 0.13 in. / 4.6 x 3.2 mm       0.24 x 0.13 in. / 6.0 x 3.2 mm       0.24 x 0.25 in. / 6.0 x 6.4 mm   
Hole Volume: 0.053 ml 0.090 ml 0.181 ml
Tablet Weight (density 0.7 g/ml): 0.037 g 0.063 g 0.127 g
Troche Weight (density 1.0 g/ml): 0.053 g 0.090 g 0.181 g

 

Cleaning- Separate all Plates before cleaning.

Automatic Dishwasher Restrictions: Silver Anodized aluminum may be cleaned on rinse cycle only in an automatic dishwasher. Automatic dishwasher detergents can discolor anodized aluminum. 

Cleaning Agents: We recommend household dishwashing liquid. Do not use acidic or caustic cleaning solutions. Do not clean with abrasive cloth, gritty materials, or steel wool. Use only plastic brushes or nylon pads.

Isopropyl Alcohol Cleaning or Drying: May be cleaned with isopropyl alcohol. Wipe with a cloth dipped in Isopropyl Alcohol, then immediately wipe dry with a clean cloth.

Hot Air Drying: May be dried in a hot air oven or using a portable hair dryer.

Autoclave: Metal parts are autoclave safe. 

**Promo codes do not apply to this product.